Toro STX-26, Руководство оператора

Страница: 31 / 48

Replacing the Fuses
There are 4 fuses in the electrical system. They are
under the control panel on the left side (
Figure 40 ).
Start circuit
30 A
Charge circuit 25 A
Cooler fan circuit 20 A
Headlight (optional) 15 A
g013185
Figure 40
1. Fuse block
Drive System
Maintenance
Servicing the Tracks
Cleaning the Tracks
Service Interval: Before each use or daily
Check the tracks for excessive wear and clean them
periodically. If the tracks are worn, replace them.
1. Park the machine on a level surface, engage the
parking brake, and lower the hydraulic lift.
2. Shut off the engine and remove the key.
3. Using a water hose or pressure washer, remove
dirt from each track system.
Important:
Ensure that you use high-pressure
water to wash only the track area. Do not use
a high-pressure washer to clean the rest of the
machine. High-pressure washing can damage the
electrical system and hydraulic valves or deplete
grease.
Important:
Ensure that you fully clean the road
wheels and the drive wheel ( Figure 41 ). The road
wheels should rotate freely when clean.
g013412
Figure 41
1. Road wheels 3. Track
2. Drive wheel
31