Toro STX-26, Руководство оператора

Страница: 25 / 48

Changing the Engine Oil
Note:
Dispose of the used oil at a recycling center.
1. Start the engine and let it run for 5 minutes.
Note:
This warms the oil so that it drains better.
2. Park the machine on a level surface, engage
the parking brake (if applicable), and lower the
hydraulic lift.
3. Shut off the engine and remove the key.
4. Change the oil as shown in ( Figure 29 ).
g242255
g027734
Figure 29
5. Slowly pour approximately 80% of the specified
oil into the filler tube and slowly add the
additional oil to bring it to the
Full mark ( Figure
30 ).
g194610
Figure 30
6. Start the engine and drive to a flat area.
7. Check the oil level again.
25