Toro REELMASTER 2300-D, Руководство оператора

Страница: 25 / 29

Hood Removal
The hood may be easily removed to ease maintenance
in the engine area.
1. Unlatch and raise the hood.
2. Remove the cotter pin securing the hood pivot to
the mounting brackets.
3. Slide the hood to the right side, lift the other side
and pull the hood out of the brackets.
4. Reverse the procedure to install the hood.
Figure 27
1. Cotter pin
Servicing The Air Cleaner
Service the air cleaner filter every 400 hours, or more
frequently in extremely dusty or dirty conditions, by
washing or using compressed air.
1. Release the latches that secure the air cleaner
cover to the air cleaner body. Separate the cover
from the body. Clean inside the air cleaner cover.
Figure 28
1. Dust Cup & Baffle
2. Filter Element
3. Air Cleaner Body
2. Gently slide the filter out of the air cleaner body
to reduce the amount of dust dislodged. Avoid
knocking the filter against the air cleaner’s body.
3. Inspect the filter and discard it if it is damaged.
Do not was or reuse a damaged filter.
Washing Method
1. Prepare a solution of filter cleaner and water and
soak the filter element about 15 minutes.
2. After soaking the filter for 15 minutes, rinse it
with clear water.
3. Dry the filter element using warm, flowing air no
hotter than 71° C, or allow the element to air dry.
Do not use compressed air or a light bulb to dry
the filter element because they may damage it.
Compressed Air Method
1. Blow compressed air from inside to the the out-
side of the dry filter element. Do not exceed 689
kPa (100 psi) to prevent damage to the filter.
2. Keep the air hose nozzle at least 3 cm from the
pleated paper, and move the nozzle up and down
while rotating the filter element.
3. Inspect for holes and tears by looking through the
filter toward a bright light.
25
Maintenance
Before servicing or making adjustments to the
machine, stop the engine and remove the key
from the switch.
CAUTION