Toro ProForce 44539, Руководство оператора

Страница: 22 / 32

Servicing the Carbon Canister
Replacing the Carbon Canister Air Filter
Service Interval: Every 200 hours
1. Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
2. Disconnect the hose from the carbon canister air filter
(Figure 21).
3. Remove and discard the carbon canister air filter
(Figure 21).
1
2
g020716
Figure 21
1. Carbon canister 2. Carbon canister air filter
4. Install the new air filter.
5. Connect the hose to the carbon canister air filter.
Replacing the Carbon Canister
Purge-line Filter
Service Interval: Every 200 hours
Note:
Check the purge-line filter occasionally for dirt. If the
filter appears to be dirty, replace it.
1. Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
2. Move the spring-type hose clamps on both sides of the
carbon canister purge-line filter away from the filter
(Figure 22).
g018506
1
2
Figure 22
1. Carbon canister purge-line
filter 2. Check valve
3. Remove and discard the carbon filter (Figure 22).
4. Install a new filter into the hose with the arrow on the
filter pointing towards the check valve and secure it
with the hose clamps (Figure 22).
Servicing the Engine Oil
Note:
Change the oil more frequently when the operating
conditions are extremely dusty or sandy.
Oil Type: Detergent oil (API service SG, SH, SJ or higher)
Crankcase Capacity: w/filter, 2 liters. (67 ounces)
Viscosity: See the table below.
Figure 23
22