Toro ProForce 44539, Руководство оператора

Страница: 6 / 32

Maintenance and Storage
•
Let engine cool before storing and do not store near
flame.
•
Shut off fuel while storing or transporting. Do not store
fuel near flames or drain indoors.
•
Park machine on level ground. Never allow untrained
personnel to service machine.
•
Use jack stands to support components when required.
•
Disconnect battery or remove spark plug wires before
making any repairs. Disconnect the negative terminal
first and the positive last. Reconnect positive first and
negative last.
•
Remove the key from the ignition switch to prevent
accidental starting of the engine when servicing, adjusting,
or storing the machine.
•
Perform only those maintenance instructions described in
this manual. If major repairs are ever needed or assistance
is desired, contact an Authorized Toro Distributor.
•
To reduce a potential fire hazard, keep the engine free of
excessive grease, grass, leaves, and accumulations of dirt.
Never wash a warm engine or any electrical parts with
water.
•
Be sure that the machine is in safe operating condition by
keeping nuts, bolts, and screws tight. Check the fan shaft
bearing mounting bolts and nuts frequently to be sure
that they are tightened to specification.
•
If the engine must be running to perform a maintenance
adjustment, keep hands, feet, clothing, and other parts of
the body away from the fan and other moving parts.
•
Do not over speed the engine by changing the governor
settings. To be sure of safety and accuracy, have an
Authorized Toro Distributor check the maximum engine
speed with a tachometer.
•
The engine must be shut off before checking the oil or
adding oil to the crankcase.
•
Keep hands and feet away from moving parts. If possible,
do not make adjustments with the engine running.
•
Charge batteries in an open well ventilated area, away
from spark and flames. Unplug charger before connecting
or disconnecting from battery. Wear protective clothing
and use insulated tools.
•
Keep all parts in good working condition and all hardware
tightened. Replace all worn or damaged decals.
•
Use only Toro approved attachments. Warranty may be
voided if used with unapproved attachments.
Hauling
•
Use care when loading or unloading the machine into a
trailer or truck.
•
Use full width ramps for loading machine into trailer or
truck.
•
Tie the machine down securely using straps, chains, cable,
or ropes. Both front and rear straps should be directed
down and outward from the machine
6