Toro ProForce 44539, Руководство оператора

Страница: 12 / 32

Choke Control
To start a cold engine, move the choke control lever (Figure
10) to the ON position.
1
G020713
2
3
Figure 10
1. Choke control 3. Hour meter
2. Ignition switch
Hour Meter
The hour meter (Figure 10) indicates the total hours of
machine operation.
Operation
Note:
Determine the left and right sides of the machine
from the normal operating position.
Attaching the Trailer
This trailer uses a coupler that requires a 2 inch ball for the
hitch.
1. Raise the trailer to a suitable hitch.
2. Lift the coupler lever on the tongue while lowering the
cover over the ball hitch (Figure 11).
Figure 11
1. Tongue 4. Auxiliary chains
2. Ball socket 5. Locking pin
3. Coupler lever, locked
position 6. Hitch tube holster
3. Close the coupler lever making sure it is securely locked.
4. Install the pin to lock the coupler lever.
5. Cross the safety chains and attach them to the holes
on the hitch. Connect the blower wiring harness
connector to the connector on the tow vehicle.
Adding Fuel
•
Fuel tank capacity: 18.9 l (5 US gallons)
•
Recommended Fuel:
– For best results, use only clean, fresh (less than 30
days old), unleaded gasoline with an octane rating of
87 or higher ((R+M)/2 rating method).
– Ethanol: Gasoline with up to 10% ethanol (gasohol)
or 15% MTBE (methyl tertiary butyl ether) by
volume is acceptable. Ethanol and MTBE are not the
same. Gasoline with 15% ethanol (E15) by volume
is not approved for use. Never use gasoline that
contains more than 10% ethanol by volume, such
as E15 (contains 15% ethanol), E20 (contains 20%
ethanol), or E85 (contains up to 85% ethanol ).
Using unapproved gasoline may cause performance
12