21
Lynx® SmartHub Installation and User Guide
To Test Radio Communication Between the FIU and the Lynx SmartHub
1. Launch Lynx. See
Figure 15
.
2. Click the Utilities bar (
Figure 15, A
).
3. Select the desired satelite from the list (
Figure 15, B
).
4. Select
SmartHub Information
radio button (
Figure 15, C
).
5. Click
Start Operations
button (
Figure 15, D
). Certain SmartHub information should be displayed on the screen
(
Figure 16
). If communication fails, the software will display a “fail” message (
Figure 17
).
Figure 16
Figure 17
Radio range can vary. Under normal conditions, a range of two miles should be feasible.
To boost radio range, mount radio antennas on masts.
If radio interference is a problem, please see the section below, “Changing the Frequency of the Radio”.
Figure 15
