Toro Groundsmaster 4500-D, Руководство оператора

Страница: 35 / 56

Premaintenance
Procedures
Removing the Hood
1. Release hood latches ( Figure 22 ) and pivot open the
hood.
Figure 22
1. Hood latch (2)
2. Remove the cotter pins securing the rear hood brackets
to the frame pins and lift off the hood.
Lubrication
Greasing the Bearings and
Bushings
Service Interval: Every 50 hours
The machine has grease fittings that must be lubricated
regularly with No. 2 General Purpose Lithium Base Grease.
If the machine is operated under normal conditions, lubricate
all bearings and bushings after every 50 hours of operation or
immediately after every washing.
The grease fitting locations and quantities are as follows:
•
Brake shaft pivot bearings (5) ( Figure 23 )
Figure 23
•
Rear axle pivot bushings (2) ( Figure 24 )
Figure 24
35