Safety
This machine has been designed in accordance with
EN ISO 5395 and ANSI B71.4-2017 and meets these
standards when you add the required decals.
General Safety
This product is capable of amputating hands and feet
and of throwing objects.
•
Read and understand the contents of this
Operator’s Manual
before starting the machine.
•
Use your full attention while operating the
machine. Do not engage in any activity that
causes distractions; otherwise, injury or property
damage may occur.
•
Do not put your hands or feet near moving
components of the machine.
•
Do not operate the machine without all guards
and other safety protective devices in place and
functioning properly on the machine.
•
Keep bystanders and children out of the operating
area. Never allow children to operate the machine.
•
Shut off the engine, remove the key (if equipped),
and wait for all movement to stop before you leave
the operator’s position. Allow the machine to cool
before adjusting, servicing, cleaning, or storing it.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always
pay attention to the safety-alert symbol
, which
means Caution, Warning, or Danger—personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.
Safety and Instructional Decals
Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
decal115-7271
115-7271
1.
Engage the reel.
3.
Disengage the reel.
2.
Engage the lever.
4.
Disengage the lever.
decal120-2769
120-2769
1.
Toxic gas inhalation
hazard—do not operate
indoors.
4.
Warning—disconnect
the spark plug wire and
read the
Operator’s
Manual
before servicing or
performing maintenance.
2.
Explosion hazard—shut
off the engine and keep
away from open flames
when refueling.
5.
Hot surface/burn
hazard—do not touch
hot surfaces.
3.
Warning—shut off the
engine and turn off the
fuel before leaving the
machine.
6.
Warning—read the
Operator’s Manual
; when
adding fuel to the tank,
only fill to the bottom of
the fill tube.
decal120-9570
120-9570
1.
Warning—stay away from moving parts, keep all guards
and shields in place.
4
