Toro E-Z Vac DFS 78556, Руководство оператора

Страница: 13 / 44

6
Installing the Bagger
Assembly
Parts needed for this procedure:
1 Bagger assembly
2 Pin and hairpin cotter assembly
Procedure
1. Position the bagger on its back ( Figure 10 ).
2. Slide the hooks onto the lower mounting bracket
(
Figure 10 ).
3. Rotate the bagger up on the lower bagger
mounting bracket.
4. Align the hole in the bagger with the upper
mounting bracket (
Figure 10 ).
5. Install the pin and secure it with the hairpin
cotter on both sides (
Figure 10 ).
g009219
Figure 10
1. Lower mounting bracket 4. Rotate bagger up
2. Hook 5. Hairpin cotter connected
to lanyard
3. Bagger 6. Pin connected to lanyard
6. Rotate the bagger-handle linkage up to the
bagger assembly and secure it with a clevis-pin
spring (
Figure 11 ).
Note:
Loosen and rotate the yoke if needed to
align it with the bagger assembly.
13