3.
Install the handle and bracket assembly to the
side of the machine with 3 carriage bolts (3/8 x
1-1/4 inches) and 3 flange nuts (large flange–3/8
inch) as shown in
Note:
Ensure that the bolts go through the
left bumper and the lower bagger bracket and
connect them to the side of the machine.
g009217
Figure 8
1.
Handle and bracket
assembly
3.
Bolt (3/8 x 1-1/4 inches)
2.
Flange nut (large
flange–3/8 inch)
5
Installing the Handle
Assembly and Bracket for
48- and 52-inch Mowers
Parts needed for this procedure:
1
Hood assembly
1
Knob
1
Carriage bolt
Procedure
Pivot the handle out into the handle bracket and
secure it with a carriage bolt and knob (
).
g009418
Figure 9
1.
Knob
3.
Carriage bolt
2.
Handle bracket
12
