11
1
2
3
m–7172
Figure 13
1.
Stop rod
2.
Front hitch
3.
Cotter pin
Note: Make sure the lift tube is install in the top hole in the
attachment lift (Fig. 14).
9. Install the lift tube to the attachment lift with a hairpin
cotter pin (Fig. 14).
1
2
3
M–7077
4
Figure 14
1.
Lift rod
2.
Tractor attachment lift
3.
Hairpin cotter pin
4.
Top hole in attachment lift
10. Open the mid-mount hitch by pulling out the J–pin and
moving the lock handle rearward (Fig. 15).
m–6622
1
4
2
3
Figure 15
1.
Front hitch
2.
Mid-mount hitch
3.
J–pin
4.
Lock handle
11. Install the pivot shaft through one side of the
snowthrower frame (Fig. 16).
12. Install the closed loop ends of the 2 springs onto the
pivot shaft (Fig. 16).
13. Install the pivot shaft to the snowthrower frame with
2 washers (15/16 inch) and 2 e–rings (Fig. 16).
5
1
m–7075
4
5
4
2
3
1
Figure 16
1.
Lift spring
2.
Pivot shaft
3.
Snowthrower frame
4.
Washer, 15/16 inch
5.
E–ring
14. Slide the control rod support under the snowthrower
frame behind the front tire (Fig. 17).
15. Push the support down to raise the snowthrower frame
up into the mid–mount hitch (Fig. 17).
Содержание 79482
Страница 27: ......