Toro 79482, Руководство оператора

Страница: 10 / 28

10
Installing the Snowthrower
The snowthrower adds a lot of weight to the front
of the tractor, causing poor traction and an
unstable condition which could result in a loss of
control.
Install the 100lb rear wheel weights (sold
separately).
Caution
1. Position the snowthrower on a flat surface with the
frame and lift tube extending rearward (Fig. 10).
1 2
3
m–7124
Figure 10
1. Tractor
2. Snowthrower
3. Lift tube
2. Park the tractor behind the snowthrower, with the lift
tube between the front wheels (Fig. 10 and 11).
3. Disengage the power take off (PTO), set the parking
brake, stop the engine and remove the key.
4. Position the snowthrower pulley box between the
snowthrower frame (Fig. 11).
5. Slide the snowthrower pulley box into the front hitch
(Fig. 11).
m–7074
1
2
3
4
Figure 11
1. Tractor
2. Front hitch
3. Snowthrower pulley box
4. Snowthrower frame
6. Place one end of the stop rod on a piece of wood
(Fig. 12).
7. Using a hammer, tap the push nut onto the end of the
stop rod (Fig. 12).
m-6927
3
2
1
4
Figure 12
1. Stop rod
2. Push nut
3. Hammer
4. Piece of wood
8. Install the stop rod into the front hitch and secure it with
a hairpin cotter pin (Fig. 13).