Toro 79413, Руководство оператора

Страница: 6 / 20

g299244
Figure 4
1. Spacer 3. Suitcase weights
2. Locknut (3/8 inch) 4. Bolts (5/8 x 2-3/4 inches)
3
Installing the Attachment
Mount
Parts needed for this procedure:
1 Stabilizer bracket
2 Carriage bolt (5/16 x 3/4 inch)
4 Locknut (5/16 inch)
2 Self-tapping screw (5/16 x 3/4 inch)
2 Bolt (5/16 x 1 inch)
1 Pivot frame
2 Hairpin cotter
2 Rod
2 Washer
Installing the Stabilizer Bracket
and Pivot Frame
1. Install the stabilizer bracket to the engine guard
using 2 carriage bolts (5/16 x 3/4 inch) and 2
locknuts (5/16 inch) (
Figure 5 ).
g300204
Figure 5
1. Carriage bolt (5/16 x 3/4
inch) 2. Locknut (5/16 inch)
2. Install the pivot frame to the machine frame as
shown in
Figure 6 . Secure the pivot frame to the
machine frame using 2 bolts (5/16 x 1 inch) and
2 locknuts (5/16 inch).
Note:
Remove the hitch bracket and hardware
if they are installed.
g300205
Figure 6
1. Locknut (5/16 inch) 2. Bolt (5/16 x 1 inch)
3. Secure the pivot frame to the bottom of the
machine frame using 2 self-tapping screws (5/16
x 3/4 inch) as shown in
Figure 7 .
6