Toro 68021HD, Руководство оператора

Страница: 34 / 44

3
2
4
1
5
G0201 19
Figure 49
1. Anchor bracket 4. Spring-removal tool
(spring removed)
2. Engine deck 5. Spring (spring removed)
3. Spring-removal tool (Toro
Part No. 92-5771)
7. Remove the bolt and nut that secure the rear bracket
for the engine deck hinge to the frame of the machine
(
Figure 50 ).
G020120
1
2
3
5
6
4
Figure 50
1. Engine deck 4. Frame
2. Pivot 5. Nut
3. Rear hinge bracket 6. Bolt
8. Lift up the rear edge of the engine deck and remove the
hinge bracket (
Figure 50 ).
9. Slide the engine deck rearward and out from the
forward hinge bracket (
Figure 51 ).
Note:
Do not remove the forward hinge bracket.
G020121
Figure 51
10. Remove the engine and engine deck from the machine
(
Figure 51 ).
Installing the Engine
1. Align the engine and engine deck to the rear frame of
the machine.
Note:
The drive pulley on the engine must align
forward.
2. Align the pivot on the engine deck with the forward
hinge bracket (
Figure 51 ).
3. Slide the engine deck forward and the pivot into the
forward hinge bracket (
Figure 51 ).
4. Align the rear hinge bracket with the pivot on the
engine-deck hinge (
Figure 51 ).
5. Lift up on the rear edge of the engine deck and slip the
hinge bracket onto the pivot.
6. Secure the rear bracket to the frame of the machine
using the bolt and nut (
Figure 50 ) removed in step 7 of
Removing the Engine (page 33) .
7. Using a spring-removal tool (Toro Part No. 92-5771),
install the tension spring to the anchor bracket on the
engine deck (
Figure 49 ).
8. Install the belts and belt guide; refer to Installing the
Belts (page 37) .
9. Adjust the belt guide; refer to Adjusting the Belt Guide
(page 38) .
10. Install the divider plate; refer to Installing the Divider
Plate (page 27) .
34