Toro 60217, Руководство оператора

Страница: 38 / 56

Fuel System
Maintenance
Cleaning the Fuel-Sediment
Cup
Model 60221HD Only
Service Interval: Every 100 hours/Every 6 months
(whichever comes first)—Clean the
fuel-sediment cup (Model 60221HD
only).
Yearly or before storage—Clean the
fuel-sediment cup (Model 60221HD only).
Underneath the fuel valve is a sediment cup to catch
dirt in the fuel.
1. Park the machine on a level surface and shut
off the engine.
2. Allow the engine to cool.
3. Disconnect the wire from the spark plug; refer to
Disconnecting the Spark-Plug Wire (page 29) .
4. Move the lever of the fuel valve to the O
FF
position, all the way to the left ( Figure 53 ).
5. Unscrew the fuel-sediment cup ( Figure 53 ).
6. Remove and retain the fuel filter and O-ring
(
Figure 53 ).
Note:
Do not clean the O-ring in solvent.
g019333
Figure 53
1. Fuel valve—O
FF
position 3. Fuel filter
2. O-ring 4. Fuel-sediment cup
7. Clean the fuel filter and sediment cup using a
nonflammable solvent, and dry it carefully.
8. Wipe the O-ring with a clean, dry cloth.
9. Install the fuel filter in the bottom of the
carburetor (
Figure 53 ).
10. Align the O-ring in to the groove in the sediment
cup and install the sediment cup to the fuel-valve
housing.
11. Move the lever of the fuel valve to the O
N
position (all the way to the right) and check for
leaks. If it leaks, replace the O-ring.
Draining the Fuel Tank
1. Remove the engine; refer to Removing the
Engine (page 36) .
2. Remove the fuel cap by rotating it
counterclockwise (
Figure 54 ).
g035167
Figure 54
3. Align a drain pan to the hinge of the engine deck.
4. Rotate the engine on the hinge side of the
engine deck and drain the fuel from the tank
(
Figure 55 ).
g035168
Figure 55
5. Carefully lower the engine and engine deck.
6. Install the fuel cap.
7. Install the engine; refer to Installing the Engine
(page 37) .
38