Toro 60217, Руководство оператора

Страница: 37 / 56

8. Remove the bolt and nut that secure the rear
bracket for the engine deck hinge to the frame
of the machine (
Figure 51 ).
g020120
Figure 51
1. Engine deck 4. Frame
2. Pivot 5. Nut
3. Rear hinge bracket 6. Bolt
9. Lift up the rear edge of the engine deck and
remove the hinge bracket (
Figure 51 ).
10. Slide the engine deck rearward and out from the
forward hinge bracket (
Figure 52 ).
Note:
Do not remove the forward hinge bracket.
g020121
Figure 52
11. Remove the engine and engine deck from the
machine (
Figure 52 ).
Installing the Engine
1. Align the engine and engine deck to the rear
frame of the machine.
Note:
The drive pulley on the engine must align
forward.
2. Align the pivot on the engine deck with the
forward hinge bracket (
Figure 52 ).
3. Slide the engine deck forward and the pivot into
the forward hinge bracket (
Figure 52 ).
4. Align the rear hinge bracket with the pivot on the
engine-deck hinge (
Figure 52 ).
5. Lift up on the rear edge of the engine deck and
slip the hinge bracket onto the pivot.
6. Secure the rear bracket to the frame of the
machine using the bolt and nut (
Figure 51 )
removed in step 8 of Removing the Engine
(page 36) .
7. Using a spring-removal tool (Toro Part No.
92-5771), install the tension spring to the anchor
bracket on the engine deck (
Figure 50 ).
8. Install the belts and belt guide; refer to Installing
the Belts (page 44) .
9. Adjust the belt guide; refer to Adjusting the Belt
Guide (page 45) .
10. Install the divider plate; refer to Installing the
Divider Plate (page 29) .
37