Toro 41393, Руководство оператора, Страница: 82 / 92

g191301
Figure 117
1. Flange (pressure-filter
head) 4. Quick-connect pin
2. Flange (coupling adapter) 5. Quick-connect coupler
(agitation hose)
3. Flange clamp 6. Quick-connect fitting
(agitation valve manifold)
2. Loosely secure the agitation-valve manifold to
the agitation-bypass valve, pressure filter head,
and coupling adapter (
Figure 117 ) with the 3
flange clamps that you removed in Removing
the Agitation-Manifold Valve (page 76) .
3. Assemble the agitation-valve manifold to the
valve support with the 2 flange-head bolt (1/4 x
3/4 inch) and flange locknut (1/4 inch) that you
removed in
Removing the Agitation-Manifold
Valve (page 76) .
4. Torque the flange-head bolts and flange locknuts
to 1978 to 2542 N∙cm (175 to 225 in-lb).
5. Tighten the 3 flange clamps by hand ( Figure
117 ).
6. Assemble the quick-connect coupler of the
agitation hose onto the quick-connect fitting
of the agitation-valve manifold with the
quick-connect pin (
Figure 117 ).
7. If you loosened the mounting hardware for the
pressure-filter head, tighten the nut and bolt to
1978 to 2542 N∙cm (175 to 225 in-lb).
Installing the Valve Actuator
1. Align the actuator to the manifold valve ( Figure
103 ).
2. Secure the actuator and valve with the retainer
that you removed in step
2 of Removing the
Valve Actuator (page 76) .
82