Toro 41393, Руководство оператора, Страница: 81 / 92

g191303
Figure 114
1. Section-bypass valve 3. Quick-connect coupler
(section supply hose)
2. Quick-connect pins 4. Quick-connect fitting
(agitation valve manifold)
4. Loosely assemble the flange clamps that you
removed in
Removing the Section-Manifold
Valve (page 77) to the flanges of the
section-valve manifold and the flanges of the
other section-valve (s) and/or coupling adapter
(
Figure 115 ).
g191300
Figure 115
1. Flange (coupling adapter) 3. Section-manifold valve
2. Flange (section-manifold
valve) 4. Flange clamps
5. For left or right section-valve manifolds,
assemble the section-valve manifold to the valve
support (
Figure 113 ) with the 2 flange-head
bolts (1/4 x 3/4 inch) and 2 flange locknuts
(1/4 inch) that you removed in
Removing the
Section-Manifold Valve (page 77) .
6. Torque the flange-head bolts and flange locknuts
to 1978 to 2542 N∙cm (175 to 225 in-lb).
7. Tighten the 2 flange clamps by hand ( Figure
115 ).
8. Assemble the quick-connect coupler of the
section hose onto the quick-connect fitting of the
section-valve manifold with the quick-connect
pin (
Figure 114 ).
9. If you loosened the mounting hardware of the left
or right section-valve manifolds, tighten the nut
and bolt to 1978 to 2542 N∙cm (175 to 225 in-lb).
Installing the Agitation-Manifold
Valve
1. Align the flange of the agitation-valve manifold
and 3 gaskets with the flanges of the
agitation-bypass valve, pressure filter head, and
coupling adapter (
Figure 116 and Figure 117 ).
Note:
If needed, loosen the mounting hardware
for the pressure-filter head as needed to provide
clearance.
g191302
Figure 116
1. Manifold (agitation valve) 4. Flange-head bolt (1/4 x
3/4 inch)
2. Valve support 5. Gasket
3. Flange locknut (1/4 inch)
81