Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
Tank/compressor assembly
1
Supply hose, 108 inches
2
Multi-Pro 1200 series adapter bracket
1
Workman adapter bracket
1
Mud flap
1
Mud flap bracket
1
Bolt (3/8 x 1 inch)
4
Flange locknut, serrated (3/8 inch)
2
Locknut (3/8 inch)
1
Carriage bolt, (3/8 x 1-1/4 inches)
4
Flange locknut, non-serrated (3/8 inch)
4
Flange bolt (5/16 x 3/4 inch)
3
Lock nut (5/16 inch)
3
Flat washer (3/8 inch)
4
1
Hose clamp, small
2
Install the tank, compressor and mixer.
Bolt (3/8 x 1 inch)
1
Locknut (3/8 inch)
1
Mixer assembly
1
2
Flat washer (3/8 inch)
2
Install the mixer tee.
Wiring harness
1
Hose clamp, small
6
3
Plastic ties
12
Wire the kit.
Rocker switch
2
4
Fuse, 15-amp
1
Install the switches and fuse.
Boom hose
2
Grommet
2
Punched-hole boom cap
2
Extension hose
2
Hose clamp, large
2
5
Parts catalog
1
Complete the installation
Separate instructions for the installation of the Foam
Marker kit are denoted in each step of the Setup
where specific procedures deviate from one machine
to another. Please look for the heading describing
instructions specific to the machine you are working
with before proceeding with each step of the Setup.
2
