Toro 41106-220000101, Руководство оператора

Страница: 52 / 84

52
SPRAY CONTROLS AND OPERATION
7. BOOM CONTROL VALVES: Directs flow to
individual boom sections. When "OFF", flow is
directed back to tank. This can be manually
overridden if Electrical Conductor is
disconnected. Green protrusion behind valve
stem indicates valve section is "ON". See FIG. 3,
page 51.
8. BOOM BYPASS VALVES: Manual adjustment
to equalize restriction of the particular Boom
Section when a section is turned "OFF." See
FIG. 3, page 51.
1878
2
9. FLOWMETER: Measures amount of fluid
flowing to Boom Control Valves. See FIG. 3, page
51.
FIG. 4
1. Agitation Control Valve 2. Pressure Gauge
1
1
FIG. 5
1. Pressure Dampener 2. Suction Dampener
3. Spray Pump
2
12. PRESSURE DAMPENER: Smooths
pressure pulsation in spray system. See FIG. 5.
13. SUCTION DAMPENER: Prevents Pump
cavitation. See FIG. 5.
14. SPRAY PUMP: Main System Spray Pump.
11. PRESSURE GAUGE: Reads System
Pressure.
10. AGITATION CONTROL VALVE: Turns
agitation "ON" and "OFF". Should be positioned
fully "ON" or "OFF," at a 9 o'clock or 3 o'clock
position.
PUMP ASSEMBLY (FIG 5)
AGITATION CONTROL (FIG 4)
3
1864-1
15. TANK DRAIN CONTROL: Turn knob
counterclockwise to open drain valve in bottom
of tank. Turn clockwise to close valve. See
FIG. 6.
16. SUCTION STRAINER:
Remove fork in
red elbow at top of the tank. Pull elbow out of
filter housing. Remove the strainer. See FIG. 6.
FIG. 6
1. Fork 3. Tank Drain Control
2. Red Elbow
1793
1
2
3
CAUTION
Chemicals can be hazardous to the
environment and cause personal injury.
Use tank drain only in a confined area.
Follow chemical manufacturer's label and
local and state regulations regarding safe
disposal of tank rinsate.