This attachment controls the spray functions of a turf
sprayer based on calculation from user input and is
intended to be used by professional, hired operators in
commercial applications. It is primarily designed for
spraying golf course applications, parks, sports fields,
and on commercial grounds. It is designed to only be
used in conjunction with machines designated by the
manufacturer.
This product complies with all relevant European
directives, for details please see the separate product
specific Declaration of Conformity (DOC) sheet.
Introduction
Read this manual carefully to learn how to operate and
maintain your product properly. The information in this
manual can help you and others avoid injury and product
damage. Although Toro designs and produces safe
products, you are responsible for operating the product
properly and safely. You may contact Toro directly at
www.Toro.com for product and accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready. Figure 1
illustrates the location of the model and serial numbers
on the product.
G013320
1
Figure 1
1.
Location of the model and serial numbers
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety alert symbol
(Figure 2), which signals a hazard that may cause serious
injury or death if you do not follow the recommended
precautions.
Figure 2
1.
Safety alert symbol.
This manual uses two other words to highlight
information.
Important
calls attention to special
mechanical information and
Note
emphasizes general
information worthy of special attention.
Contents
Introduction................................................................. 2
Safety ........................................................................... 3
Setup............................................................................ 4
Installing the ProControlFor Model Year 2009
and Older only. ................................................. 5
Installing the ProControlFor Model Year 2010
and Newer only................................................. 6
Product Overview ........................................................ 9
Controls ............................................................... 9
Operation................................................................... 11
Initially Programming the Console
Computer....................................................... 11
Programming the Console Computer.................. 12
Self-Testing the Console Computer..................... 14
Activating the Data Lock .................................... 14
Changing the Data Lock ..................................... 14
Entering the Mode Sequence with the Data
Lock Activated ............................................... 15
Limit Alarm ................................................... 15
Setting Up the System......................................... 15
Initially Field-testing the System.......................... 16
Maintenance............................................................... 17
Recommended Maintenance Schedule(s) ................ 17
Cleaning the Flowmeter...................................... 17
Calibrating the Flowmeter .................................. 17
Testing the Flowmeter Cable............................... 18
Troubleshooting......................................................... 19
© 2010—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
2
Contact us at www.Toro.com.
Printed in the USA.
All Rights Reserved
