Toro 30809 Groundsmaster 3500-G, Руководство оператора

Страница: 30 / 52

Maintenance
Note:
Determine the left and right sides of the machine
from the normal operating position.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the first hour
• Torque the wheel nuts.
After the first 8 hours
• Check the condition and tension of all belts.
After the first 10 hours
• Torque the wheel nuts.
• Change the hydraulic filter.
After the first 50 hours
• Change the oil and oil filter.
Before each use or daily
• Check the engine oil level.
• Check the engine coolant level.
• Check the hydraulic fluid level.
• Check the tire pressure.
• Check the interlock system.
• Clean debris off of the radiator and oil cooler.
• Check the hydraulic lines and hoses.
• Check the blade-stopping time.
Every 25 hours
• Check the electrolyte level. (If machine is in storage, check every 30 days.)
Every 50 hours
• Lubricate all bearings and bushings. (Lubricate all bearings and bushings daily
when conditions are dusty and dirty.)
Every 200 hours
• Service the Air Cleaner (More frequently in extreme dusty or dirty conditions)
• Change the oil and oil filter.
• Torque the wheel nuts.
• Check the parking brake adjustment.
• Check the condition and tension of all belts.
• Change the hydraulic filter.
Every 400 hours
• Replace the spark plugs.
• Replace the fuel-pump filter.
• Check the fuel lines and connections.
• Change the hydraulic fluid.
Every 500 hours
• Grease the bearings in the rear axle.
Every 2 years
• Drain and clean the fuel tank.
• Flush the cooling system and replace fluid.
CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and seriously injure
you or other bystanders.
Remove the key from the ignition before you do any maintenance.
30