Toro 30460, Руководство оператора

Страница: 23 / 32

Figure 36
1. Spring loaded idler pulley 3. Long hook end
2. Short hook end
7. Pull back on the spring loaded idler pulley and install
the belt onto the spring loaded idler pulley (
Figure 35 ).
Checking and Adjusting the
Blower Latch
Close the blower assembly to see if the latches are adjusted
correctly. Loosen or tighten the bolts so the latches firmly
hold the blower assembly against the mower deck , but can be
released by hand.
Figure 37
1. Latch 3. Blower assembly
2. Bolt
Greasing the Idler Arm and
Handle Pivot
Service Interval: Every 50 hours—Grease the idler arm.
Every 100 hours—Grease the handle pivot.
Grease the blower belt idler arm ( Figure 38 ).
Figure 38
Grease the handle pivot ( Figure 39 ).
Figure 39
23