Toro 30460, Руководство оператора

Страница: 11 / 32

Figure 11
1. Lower mounting bracket 4. Rotate bagger up
2. Hook 5. Hairpin cotter pin
connected to lanyard
3. Bagger on it's back 6. Pin connected to lanyard
6. Install the nuts and yokes onto the threaded rod ( Figure
12 ).
7. Adjust the yokes until the center of the holes are 9
inches (228.6 mm) apart (
Figure 12 ).
Figure 12
1. Yoke 3. Threaded rod
2. Nut
4. 9 inches (229 mm) apart
8. Tighten the nuts against the yokes.
9. Install the yokes to the bagger assembly and handle and
secure it with 2 clevis pin springs (
Figure 13 ).
10. Rotate the bagger handle linkage up to the bagger
assembly and secure it with a clevis pin spring (
Figure
13 ). Loosen and rotate the yoke if needed to align with
the bagger assembly.
Figure 13
1. Bagger arm assembly 3. Clevis pin spring
2. Bagger handle linkage 4. Bagger assembly
11