Toro 22317, Руководство оператора

Страница: 34 / 44

detergent, diesel engine oil (API service CH-4
or higher); refer to Checking Hydraulic Fluid
in Operation, page 17.
Note:
Dispose of used oil at a certified
recycling center.
8. Remove and store the cylinder locks and lower
the loader arms.
Checking the Hydraulic
Lines
After every 25 operating hours, check the hydraulic
lines and hoses for leaks, loose fittings, kinked
lines, loose mounting supports, wear, weather,
and chemical deterioration. Replace all moving
hydraulic hoses every 1500 hours or 2 years, which
ever comes first. Make necessary repairs before
operating.
Hydraulic fluid escaping under pressure
can penetrate skin and cause injury. Fluid
injected into the skin must be surgically
removed within a few hours by a doctor
familiar with this form of injury or gangrene
may result.
• Keep your body and hands away from
pin hole leaks or nozzles that eject high
pressure hydraulic fluid.
• Use cardboard or paper to find hydraulic
leaks, never use your hands.
34