Toro 22317, Руководство оператора

Страница: 29 / 44

Figure 25
1. Filter 2. Hose clamp
5. Place a drain pan under the fuel lines to catch
any leaks, then remove the filter from the fuel
lines (Figure 25).
6. Install a new filter and move the hose clamps
close to the filter.
7. Remove the clamp blocking fuel flow and open
the fuel valve.
Draining the Fuel Tank
In certain conditions, gasoline is extremely
flammable and highly explosive. A fire or
explosion from gasoline can burn you and
others and can damage property.
• Drain gasoline from the fuel tank when
the engine is cold. Do this outdoors in
an open area. Wipe up any gasoline that
spills.
• Never smoke when draining gasoline,
and stay away from an open flame or
where a spark may ignite the gasoline
fumes.
1. Park the traction unit on a level surface, to
ensure that the fuel tank drains completely.
2. Lower the loader arms, stop the engine, and
remove the key.
3. Shut off the fuel valve in the hose near the
bottom of the fuel tank (Figure 26).
Figure 26
1. Fuel valve, open 2. Fuel valve, closed
4. Loosen the hose clamp at the fuel filter and
slide it up the fuel line away from the filter.
5. Pull the fuel line off of the fuel filter, open the
fuel valve, and allow the gasoline to drain into
a gas can or drain pan.
6. Install the fuel line onto the fuel filter.
7. Slide the hose clamp close to the fuel filter to
secure the fuel line.
8. Open the fuel valve in the hose near the bottom
of the fuel tank as illustrated in Figure 26.
Note:
Now is the best time to install a new fuel
filter because the fuel tank is empty.
Electrical System
Maintenance
Warning
CALIFORNIA
Proposition 65 Warning
Battery posts, terminals, and related
accessories contain lead and lead
compounds, chemicals known to the State of
California to cause cancer and reproductive
harm. Wash hands after handling.
Replacing the Battery
When the battery no longer holds a charge, replace
it.
Important:
Use only a genuine Toro
replacement battery.
1. Park the traction unit on a level surface, raise
the loader arms, and install the cylinder locks.
2. Stop the engine and remove the key.
29