Toro 22045, Руководство оператора

Страница: 7 / 24

7
Turn key in ignition
switch. Raise/lower control
bar.
Move control.
Raise/lower control
bar.
Move control forward. Raise control bar.
Move control
rearward.
Raise control bar.
Lower control bar.
Assembly
Install Handle (Fig. 2)
1. Mount handle to outside of mower housing, using
bottom hole, with (2) 5/16–18 x 1–1/4” (8 mm x 31
mm) capscrews, washers, and thin nylon insert
locknuts (Fig. 2).
2. Secure handle latches to handle with (2) 5/16–18 x
1–1/2” (8 mm x 38 mm) capscrews, washers and nylon
insert locknuts (Fig. 2).
Note: Handle height is adjustable for operator comfort.
Stand behind mower handle to gauge height. To adjust
handle height, reposition capscrews and locknuts securing
handle latches to handle into other mounting holes in
latches.
3. Slide bag support rod thru top mounting holes in
handle and secure each end with a cap locknut (Fig. 2).
m-534
1
2
3
4
Figure 2
1. Handle
2. Cap locknut
3. Bag support rod
4. Handle latch
4. Use cable ties to secure the control cables to handles
below the bag support rod.