background image

E

The Toro Company

 

– 1998

All Rights Reserved

Printed in USA

2

Contents

Page

Introduction

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Safety

3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Training

3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Preparation

3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Operation

3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Maintenance And Storage

4

. . . . . . . . . . . . . . . . . . . 

Sound Pressure Level

4

. . . . . . . . . . . . . . . . . . . . . . . 

Sound Power Level

4

. . . . . . . . . . . . . . . . . . . . . . . . 

Vibration Level

4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Symbol Glossary

4

. . . . . . . . . . . . . . . . . . . . . . . . . . 

Assembly

7

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Install Handle (Fig. 2)

7

. . . . . . . . . . . . . . . . . . . . . . 

Install Gas Tank And Fuel Line

8

. . . . . . . . . . . . . . . 

Install Air Cleaner Cover

8

. . . . . . . . . . . . . . . . . . . . 

Install Discharge Tunnel Plug

8

. . . . . . . . . . . . . . . . 

Before Starting

9

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Mix Gasoline And Oil—50:1 Ratio

9

. . . . . . . . . . . . 

Recycling Tips

10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

General Tips

10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Cutting Grass

10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Cutting Leaves

11

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Operation

11

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Operating Tips

11

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Starting, Stopping, and Self-propelling

11

. . . . . . . . . 

Using Discharge Tunnel Plug

12

. . . . . . . . . . . . . . . . 

Using Grass Bag

12

. . . . . . . . . . . . . . . . . . . . . . . . . . . 

Adjusting Height-of-cut

13

. . . . . . . . . . . . . . . . . . . . . 

Maintenance

14

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Servicing Air Cleaner

14

. . . . . . . . . . . . . . . . . . . . . . . 

Replacing Spark Plug

14

. . . . . . . . . . . . . . . . . . . . . . . 

Draining Gasoline

15

. . . . . . . . . . . . . . . . . . . . . . . . . 

Adjusting Throttle

15

. . . . . . . . . . . . . . . . . . . . . . . . . 

Cleaning Cooling System

15

. . . . . . . . . . . . . . . . . . . . 

Cleaning Muffler And Exhaust Port

15

. . . . . . . . . . . 

Adjusting the Self-propel Drive System

16

. . . . . . . . 

Inspecting/Removing/Sharpening Blade

17

. . . . . . . . 

Lubrication

18

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Lubricating Gear Case

19

. . . . . . . . . . . . . . . . . . . . . . 

Adjusting Blade Brake Cable

19

. . . . . . . . . . . . . . . . . 

Cleaning Mower

19

. . . . . . . . . . . . . . . . . . . . . . . . . . . 

Belt Cover

21

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Cleaning Blade Brake Clutch Shield

21

. . . . . . . . . . . 

Servicing Wheels (Fig. 33)

22

. . . . . . . . . . . . . . . . . . 

Fuel Filter

22

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Preparing Mower For Storage

22

. . . . . . . . . . . . . . . . 

Accessories

23

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Introduction

Thank you for purchasing a Toro product.

All of us at Toro want you to be completely satisfied with
your new product, so feel free to contact your local
Authorized Service Dealer for help with service, genuine
Toro parts, or other information you may require.

Whenever you contact your Authorized Service Dealer or
the factory, always know the model and serial numbers of
your product. These numbers will help the Service Dealer
or Service Representative provide exact information about
your specific product. You will find the model and serial
number decal located in a unique place on the product
(Fig. 1).

m-2302

Figure 1

1.

Model and serial number decal

For your convenience, write the product model and serial
numbers in the space below.

Model No.

Serial No.

Read this manual carefully to learn how to operate and
maintain your product correctly. Reading this manual will
help you and others avoid personal injury and damage to
the product. Although Toro designs, produces and markets
safe, state-of-the-art products, you are responsible for
using the product properly and safely. You are also
responsible for training persons who you allow to use the
product about safe operation.

The Toro warning system in this manual identifies
potential hazards and has special safety messages that help
you and others avoid personal injury, even death.
DANGER, WARNING and CAUTION are signal words
used to identify the level of hazard. However, regardless
of the hazard, be extremely careful.

DANGER signals an extreme hazard that will cause
serious injury or death if the recommended precautions
are not followed.

Содержание 22045

























Отзывы: