Toro 08102, Руководство оператора

Страница: 92 / 104

Checking the Front
Differential Oil Level
Service Interval: Every 500 hours—Check the front
differential oil level.
Fluid Type: 80W-90 Gear Oil
1. Park the machine on a level surface.
2. Shift the transmission lever to the P (P
ARK
)
position.
3. Shut off the engine and remove the key.
4. Remove the check plug on the front differential
(
Figure 105 ).
Note:
The oil level should be even with the
bottom of the check plug.
5. If the oil level is low, you may add the specified
oil through the check plug opening (
Figure 105 ).
6. Replace the check plug and torque it to 15 to
25 N∙m (11 to 18 ft-lb).
g399038
Figure 105
1. Fill plug 3. Drain plug
2. Check plug
Changing the Front
Differential Oil
Service Interval: Every 1,000 hours—Change the
front differential oil.
Fluid Type: 80W-90 Gear Oil
Fluid Capacity: 0.3 L (0.32 US qt)
1. Park the machine on a level surface.
2. Shift the transmission lever to the P (P
ARK
)
position.
3. Shut off the engine and remove the key.
4. Align a drain pan under the drain plug ( Figure
105 ).
5. Remove the fill plug ( Figure 105 ).
Note:
Retain the fill plug and seal for installation
in step 9 .
6. Remove the drain plug and allow the fluid to
drain completely (
Figure 105 ).
Note:
Retain the drain plug for installation in
step 7 .
7. Install the drain plug and torque it to 15 to 25
N∙m (11 to 18 ft-lb).
8. Fill the front differential with the specified fluid
and capacity.
9. Install the fill plug and torque it to 15 to 25 N∙m
(11 to 18 ft-lb).
10. Allow the oil to settle for approximately 5
minutes, then check the level;
Checking the
Front Differential Oil Level (page 92) .
92