Toro 08102, Руководство оператора

Страница: 70 / 104

Maintenance
Maintenance Safety
•
Do not allow untrained personnel to service the
machine.
•
Before you leave the operating position, do the
following:
– Park the machine on a level surface.
– Shift the transmission lever to the P (P
ARK
)
position.
– Shut off the machine and remove the key.
– Wait for all movement to stop.
•
Allow the machine to cool before adjusting,
servicing, cleaning, or storing it.
•
Support the machine with jack stands whenever
you work under the machine.
•
Do not work under a raised bed without the proper
bed safety support in place.
•
To ensure that the entire machine is in good
condition, keep all hardware properly tightened.
•
To reduce the potential fire hazard, keep the
machine area free of excessive grease, grass,
leaves, and accumulation of dirt.
•
If possible, do not perform maintenance while the
machine is running. Keep away from moving parts.
•
If you must run the machine to perform a
maintenance adjustment, keep your hands, feet,
clothing, and any parts of the body away from
any moving parts. Keep bystanders away from
the machine.
•
Clean up oil and fuel spills.
•
Keep all parts of the machine in good working
condition and all the hardware properly tightened.
Replace all worn or damaged decals.
•
Never interfere with the intended function of a
safety device or reduce the protection provided
by a safety device.
•
Do not overspeed the engine by changing the
governor settings. To ensure safety and accuracy,
have an authorized Toro distributor check the
maximum engine speed with a tachometer.
•
If major repairs are ever necessary or assistance
is required, contact an authorized Toro distributor.
•
Altering this machine in any manner may affect the
operation of the machine, performance, durability,
or its use may result in injury or death. Such use
could void the product warranty of The Toro®
Company.
70