Reel Drive Lever
The reel drive lever (Figure 10) is located on the
right front corner of the machine. The lever has two
positions: Engage and Disengage. Pull up on the lever
to engage the reel or push it down to disengage the reel.
Figure 10
1.
Reel drive lever
Choke Lever
The choke lever (Figure 11) is located on left front of
the engine. The lever has two positions: Run and Choke.
Move the lever to the Choke position when starting
a cold engine. After engine starts move lever to Run
position.
Figure 11
1.
Choke lever
2.
Fuel shut-off valve
Fuel Shut-Off Valve
The fuel shut-off valve (Figure 11) is located on left
front of engine. The valve has two positions: Closed
and Open. Move the lever to the closed position when
storing or transporting machine. Open the valve before
starting the engine.
Recoil Starter
Pull recoil starter handle (Figure 12) to start engine.
Figure 12
1.
Recoil starter
2.
Kick stand
Kickstand
The kickstand (Figure 12) is mounted to the rear of
machine and is used to raise the rear of machine for
installation or removal of the transport wheels.
Specifications
Model 04052
Model 04060
Width
36 inches (91 cm)
41 inches (104 cm)
Height
41–1/2 inches (105
cm)
41-1/2 inches
(105.4 cm)
Length with basket
59 inches (150 cm)
59 inches (150 cm)
Dry weight (with
basket and Wiehle
roller; without
wheels or grooming
reel)
208 lb (94 kg.)
229 lb (104 kg)
Width of cut
21 inches (53 cm)
26 inches (66 cm)
Height of cut
0.063 to 1.25
inches (1.6 mm
to 31.8 mm)
0.063 to 1.25
inches (1.6 mm
to 31.8 mm)
Clip
0.17 inch (34.2 mm) 0.23 inch (5.8 mm)
Engine speed
Low idle –1600
±100 RPM, High
idle – 3600 ±100
RPM
Low idle –1600
±100 RPM, High
idle – 3600 ±100
RPM
Attachments/Accessories
A selection of Toro approved attachments and
accessories are available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
14
