tornos EvoDECO 10/10, Инструкция по эксплуатации

Страница: 36 / 38

298061_en - 07/12
2. Installation - Instruction Manual - EvoDECO 10/10 & 10/8
2-14
2.9.1.2. Pneumatic supply
Fig. 10
2.9.2. Emptying liquids
2.9.2.1. Cutting liquid
2.9.2.2. Spindle coolant
2.9.2.3. Greasing liquid
2.9.2.4. Machine cleaning
Step Key Action / Observation
1. Disconnect the supply pipe (1).
(1)
Information!
The cut-off liquid must be pumped using an external pump and stored in appropriate containers.
Information!
It is not necessary to drain the spindle coolant circuit to move the machine.
Information!
It is not necessary to drain the centralised greasing circuit to move the machine.
Danger!
This operation is to be done in a well-ventilated area.
Warning !
Be careful not to damage or change anything.
Avoid using compressed air and products which can harm the synthetic materials.