11: TROUBLESHOOTING
©Tormach® 2020
Specifications subject to change without notice.
Page 60
UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A)
For the most recent version, see tormach.com/support
11.2.1 Coolant Pump Doesn't Work
l
Problem
The coolant pump doesn't work.
l
Cause
The coolant pump may not be receiving power, or there may be faulty components.
You May Need
To...
Probability
How-To Steps
Need More?
Turn on the
coolant pump.
High
Examine the coolant pump's switch. If necessary, turn it
to the
ON
position.
For information, see "Controls
Fill the coolant
tank.
High
Examine the coolant level in the coolant tank. If
necessary, fill it to an appropriate level.
For information, see "Machine
Examine the
coolant pump.
Medium
Examine the coolant pump for blockages or mechanical
damage. If necessary, remove blockages or replace the
coolant pump.
Email [email protected] to
contact Tormach Technical Support
for guidance on how to proceed.
Examine the
main motor.
Low
Verify that the motor that drives the blade (main
motor) is powered on and operating. If it's not on, turn
it on.
Email [email protected] to
contact Tormach Technical Support
for guidance on how to proceed.
Replace the
main fuse.
Low
Examine the main fuse. If necessary, replace it.
For information, see "Electrical
