5.1 CONTROLS OVERVIEW
To safely and effectively operate your machine, you must
become familiar with its basic controls.
5.1.1 Machine Controls
The following controls energize the machine's control
electronics:
l
Main Disconnect Switch
On the front of the electrical
cabinet.
l
Cycle Start Button
On the operator panel.
Figure 5-1: Operator panel.
l
Coolant Switch
On the operator panel.
l
Pause Button
On the operator panel.
l
Emergency Stop Button
On the operator panel.
5.1.2 Program Controls
The control panel has the following controls, used to switch
between automatic and manual mode, and to set the
parameters for machine operations:
l
Up and Down Arrow Buttons
On the control panel.
For information, see "Set the Number of Cuts"
l
Stroke Button
On the control panel.
For information, see "Set the Number of Cycles"
Figure 5-2: Control panel.
©Tormach® 2020
Specifications subject to change without notice.
Page 26
UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A)
For the most recent version, see tormach.com/support
5: SYSTEM BASICS
