Tormach 1300PL, Руководство оператора

Страница: 7 / 100

©Tormach® 2020
Specifications subject to change without notice. Page 7 UM10720: 1300PL Operator's Manual (Version 0820B)
For the most recent version, see tormach.com/support
TABLE OF CONTENTS
Ohmic Touchoff 44
Physical Touch Switch 44
5.2 Basic Controls Reference 45
5.2.1 Machine Controls 45
5.2.2 PathPilot Interface 45
5.3 Connectors Reference 45
5.4 Plasma Source Control 47
5.5 Plasma Settings Reference 48
5.5.1 Touch Switch Trigger Depth 48
5.5.2 Minimum Touchoff Spacing 48
5.5.3 Enable Ohmic Touchoff 49
5.5.4 Enable THC 49
5.5.5 Enable Arc-Ok Checking 49
BASIC OPERATIONS 51
6.1 Selecting a Method for Initial Height Sensing (IHS) 52
6.2 Making Your First Cuts 52
6.2.1 Test G-Code 52
6.2.2 Code Breakdown 52
6.2.3 Running the Test Program 53
6.3 Use the AutoFS Material Picker 53
6.3.1 Writing G-Code with AutoFS 53
6.3.2 Using AutoFS 54
6.3.3 Creating new AutoFS Presets 54
PROGRAMMING 55
7.1 Plasma Specific G-Codes 56
7.2 Plasma Specific M-Codes 56
MACHINE MAINTENANCE 59
8.1 Maintenance Safety 60
8.1.1 All Maintenance Procedures 60
8.1.2 Swarf Maintenance Procedures 60
8.2 Maintenance Schedules 60
8.2.1 Daily 60
8.2.2 Weekly 60
8.2.3 Monthly 60
8.2.4 Semi-Annually 60
8.2.5 As Needed 60
8.3 Adjust Belt Tension 60
8.4 Adjust Rack and Pinion Preload 61