Torin TR4055, Руководство пользователя

Страница: 9 / 52

9
8. Pump handle to lift until saddle contacts load.
Continue to pump the jack handle to lift the
vehicle to the desired height.
9. After lifting, support the load appropriately before
removing transmission.
LOWERING THE JACK
1. Support the load with appropriate means before
removing transmission. Check to make sure the
transmission stable on the jack saddle and load
is fixed in place before attempting to lift lower, or
transport.
2. Grasp the handle firmly with both hands.
Securely hold on to the jack handle so your
hands do not slip and ensure the release valve
does not rapidly lower.
3. Carefully open the Release Valve by slowly
turning the handle counterclockwise. (Do not
allow bystanders around the jack or under the
load when lowering the jack.
4. Lower saddle to the lowest minimum height
before attempting to transport load.
TRANSPORTING THE LOAD
1. Ensure the jack saddle is fully lowered and
load is secure before attempting to lift, lower, or
transport transmission.
2. Transport the load over level and solid ground,
preferably concrete, and ensure the floor is swept
clean before transporting load.
3. Be diligent in continually monitoring the load in
transit. Keep all other persons at a safe distance.
4. DO NOT use on asphalt, or any soft surface
as jack may sink or tip, causing damage to
transmission or personal or injury/harm may
result.
5. WARNING: If jack tips or leans STOP WHAT
YOUR ARE DOING. MOVE QUICKLY TO A
SAFE DISTANCE. DO NOT TRY TO HOLD OR
STEADY JACK to prevent personal injury and/or
property damage.
All numbers in parenthesis () refer to the index
number from the parts breakdown.
RAISING THE JACK
1. Before use, ensure the transmission weight and
size does not exceed the capacity of the jack.
2. Ensure the vehicle from which the gearbox is to
be removed is correctly positioned,
3. Check handbrake applied and raised to allow the
transmission jack to be positioned correctly.
4. Ensure there are no other persons around or
under the vehicle.
5. Ensure saddle is in its lowest position and use
handle to transport and centrally position jack
beneath vehicle transmission.
6. Assemble the handle, ensure to align with slots
7. Close the release valve by turning it clockwise
until it is firmly closed.
OPERATION