Topview Kestrel 3100m, Инструкция по установке, техническому обслуживанию и эксплуатации

Страница: 9 / 52

- 5 -
required to move the equipment with equivalent force from both sides, and they shall also
pay attention to protecting their waist from any sprain on exertion.
Considering the specialized knowledge involved in the installation, the equipment
shall only be installed by service representatives authorized by our company. Our
company will negotiate with the buyer to make an appointment on the installation, and
will install it free of charge upon delivery. It will take about one working day to install the
system and perform the initial calibration. Installation requirements:

In order to ensure the convenient installation and comfortable utilization by patients, this
equipment shall at least be installed at the place with an area being 6 inches*8 inches
(about 1.8m*2.4m).

In order to prevent heat build-up effect that could damage equipment, it shall be installed
in the well-ventilated room, with the equipment's ventilation cover for heat dissipation
unblocked.

Only the trained personnel can perform the installation and calibration. Equipment shall
be handled and transported with great caution, since the equipment consists of fragile optical
modules that shall be calibrated in a highly accurate way.
1.12 Symbols and labels
Important! Refer to the random
files
Notes
Computer switch Fuse
Connect (main power) Type B, applied part
Switch off the general power
supply.
Protective grounding (earth)
Keep the package away from rain
The package should be moved
upright when transported
Since the transport package
contains fragile pieces, please
handle with great care. Indicates that the maximum
number of layers for stacking the
same packages is 3