Topview Kestrel 3100m, Инструкция по установке, техническому обслуживанию и эксплуатации

Страница: 41 / 52

- 37 -
Close: Select corresponding modes as needed. Click "Close" button on the main interface, and the
equipment will exit from the program and shut down the computer.
3.8 Backup and update of software
1
Data backup: During the data management, select data according to the targeted date
range and export data to USB storage file.
2
US-disk upgrade
Software upgrade package (fcm-updatedir-0-8-5-1.zip), validation file
(fcm-updatedir-0-8-5-1.key).
Preparations before upgrade: Place software upgrade package and validation file under the
catalogue of USB specified folder.

Conditions when the software is not started: When the software is not started, the first step:
Insert U-disk first.
Step 2: Turn on the power switch and start the equipment; Step 3: Run software detection
function and identify U-disk, with software upgrade package window popping out. Step 4:
Select the software version to be upgraded and corresponding software upgrade package to
upgrade the software.
Step 5: After the software upgrade is completed, the U-disk will be rejected.

Conditions when the software is started: When the software is started, the first step: Insert
U-disk first. Step 2: Restart the software.
Step 3: After software resets, it will identify the software upgrade package in the U-disk.
Step 4: Select the software upgrade package corresponding to the software version, and
upgrade the software.
Step 5: After the software upgrade is completed, the U-disk will be rejected.