GT08 GPS Motorcycle/Vehicle Tracker User Manual
Page
4
II. How to Operate it
The default user password is
111111
.
If the user password is changed, user should send the SMS command with
the new user password instead of 111111.
XXX is the control code, all the letters must be
capital letters or in small
letters
, command with mixed capital letter & small letter is not recognized by
system
Authorize the Alarm-received Phone No.
SMS command:
111111*10 Mobile #1*20 Mobile #2*
In case of alarm, if user wants to get the alarm SMS from the tracker, he/she
needs send the following SMS to program the tracker firstly, otherwise, the alert
information can't be received correctly.
Example: User sends the SMS 111111*1013922713571*2013711189059* to the
tracker
‟s SIM card number, if there is any alarm, system will send SMS to both of these two
mobiles. In case of SOS alarm, the system will only send alarm to the mobile #2
Arm/Disarm by Phone Calling
User could also use the
1st
alarm-received mobile phone to call the
tracker
‟s SIM card number, so as to arm/disarm the system.
Arm
: After hearing several ring tones, if the systems hang up the call
automatically, and call back you, it means that the system is armed.
Disarm
: After hearing several ring tones, if the system hangs up the call
automatically, and don‟t call back you, it means that the system is disarmed.
Note
:
(1) There is no communication fee for this operation, it is a very convenient way to arm
& disarm the system.
(2)The SIM card inside the device must have the function of Caller ID Display.
(3) Only the 1st
alarm-received mobile phone
can realize this function.
