GT08 GPS Motorcycle/Vehicle Tracker User Manual
Page
14
Installation Steps:
(1) Please read the manual carefully before installation. Please prepare a valid
GSM SIM card with Caller ID Display & GPRS function;
(2) Please use the screw driver to open the cover;
(3) Insert the valid GSM SIM card, then turn on the power switch;
(4) Close the cover, and fix the main unit tightly with the wiring harness at the
correct place, please make sure that the side with GPS antenna is placed
upside to sky, please make sure to install the main unit at broad place so
that it can receive GPS signal well. For motorcycle, it is better to install
inside the head bulb light where there is power supply and water proof. For
vehicle, it is better to install inside the upper rim of the driving room or inside
the dashboard. The recommend installation place is showed in the following
picture:
For motorcycle For vehicle
(5) Do the wring connection according to the diagram;
(6) Call the SIM card, to check if rings, if not, then check the power supply and
the change the place of installation;
(7) If it rings when calling the SIM card, then send SMS to the tracker to check
the GPS coordinate, if the GPS location is not correct, then fix the main unit
to other place so that it can receive
better GPS signal.
(8) IMPORTANT: The side with GPS
antenna must be placed upside to
the sky and kept away from the
metal materials, otherwise, it can
‟t
get GPS signal well.
