TOPP T50, Инструкция по установке и эксплуатации

Страница: 38 / 56

6.2- MOUNTING A SINGLE ACTUATOR ON TOP-HUNG WINDOWS
(Figs. 7÷17)
ASSEMBLY OPERATIONS INCLUDE DRILLING HOLES IN THE WINDOW; BEFORE
PROCEEDING WITH FINAL DRILLING CHECK THE ALIGNMENT OF THE ACTUATOR
BRACKETS. FIGURES 7 AND 8 INDICATE THE DISTANCES TO RESPECT FOR THE
CORRECT POSITIONING OF THE BRACKETS FOR LATERAL (FIG. 7) OR FRONT (FIG. 8)
ASSEMBLY.
SINGLE ACTUATORS MUST BE INSTALLED ON THE MIDDLE LINE OF THE WINDOW
FRAME (see fig. 9).
1) Fig. 9 - Mark the middle line "X" of the window frame with a pencil.
2) Fig. 12 - Place the supplied template over the marked middle line and mark the holes
for the "SF" butterfly bracket and the "SA" actuator bracket with a pencil.
3) Fig. 13 - Use a suitable drill to make holes in the window frame and then fix the "SF"
butterfly bracket using the "VI" screws.
4) Fig. 14 - Assemble the claw by mounting the "Ml1" clamps and securing them with
the "DI" nuts and bolts; mount the "SA" bracket on the "Ml1" clamps and slightly
tighten the "V3" bolts and "D2" nuts with the supplied Allen key without forcing.
5) Fig. 14 - Fix the previously assembled claw to the holes drilled in the fixed part of the
window frame using the "VI" screws.
6) Fig. 16 - Attach the actuator to the claw; fix the actuator to the "SF" butterfly racket
using the "V4" bolt and the "D3" nut.
7) Fig. 17 - Adjust the closing position of the window by pulling back the actuator. The
"Ml1" brackets slide along the "CD" toothed runner of the actuator and each click
corresponds to a movement of 2 mm; make sure to stop the actuator after the click.
Adjust the actuator so that it adheres to the window frame gaskets and closes
perfectly. Secure the actuator by tightening the "V2" screws with the supplied Allen
key with a torque of 240 N cm.
8) Fig. 15 - Open and close the window, checking that the actuator behaves correctly. If
the actuator requires further adjustment, loosen the "V2" screws and move it.
6- INSTALLATION T50
38 INSTALLATION AND USE INSTRUCTIONS
EN