TOPP T50, Инструкция по установке и эксплуатации

Страница: 36 / 56

5- TRANSPORT AND HANDLING T50
ISTRUZIONI PER L'INSTALLAZIONE E L’USO 36 INSTALLATION AND USE INSTRUCTIONS
5.2.2- Contents of pack
Single actuator
Each standard product pack (cardboard box) contains (Fig. 6 ) :
• 1 Actuator complete with power cable;
•
1 window connector kit (butterfly bracket) (Ref. A) complete with nut and bolt;
• 1 Actuator support claw and bracket kit (Ref. B) complete with nuts and bolts;
• Bag of fixing screws for aluminium window frames;
• 1 Installation and use instructions
(Ref. C) ;
• 1 Adhesive warning plate (Fig. 5 ).
Non-motorised actuator for application in pairs
Each standard tandem product pack (cardboard box) contains (Fig. 6 ):
• Non-motorised actuator;
• window connector kit (butterfly bracket) (Ref. A) complete with nut and bolt;
• Actuator support claw and bracket kit (Ref. B) complete with nuts and bolts;
• transmission bar kit (Ref. D) , V5 screws and "FE" stops;
• Bag of fixing screws for aluminium window frames;
MAKE SURE THE ABOVE COMPONENTS ARE INSIDE THE PACK AND THAT THE
ACTUATOR HAS NOT SUFFERED DAMAGE DURING TRANSPORT.
IF ANY FAULTS ARE FOUND, DO NOT INSTALL THE ACTUATOR BUT CONTACT THE
TECHNICAL ASSISTANCE SERVICE OF YOUR LOCAL DEALER OR MANUFACTURER.
DISPOSE OF THE PACKAGING (PAPER, PLASTIC, ETC.) IN COMPLIANCE WITH
CURRENT LEGISLATION.
5.2.3- Accessories (available separately)
• Connection bar (Ref. B of figure 6D);
- Length 2500 mm or 1500 mm
- Material: Aluminium alloy 2011
- Bar profile: Hexagonal "key 10"
EN