VoxiPlus
Advanced
INSTALLATION MANUAL
© 2008 TOPEX S.A.
page
44
7 TECHNICAL
SPECIFICATIONS
Product Name
TOPEX VoxiPLUS
Mechanical Built
Metal case, compact version or 2U rack with four slots for plug-in cards
Processor card (PGVoIP)
Card for main processor and VOIP (2 VoIP interfaces)
Can also feature two interfaces for E1 digital trunks
E1 digital trunks
The two E1 interfaces are according to the G.703 standard and the frame
structure si according to G.704. The line impedance is 75 0r 120 ohm,
symmetrical. The internal clock generator may work alone or synchorniyed
with any external criteria, if you need to connect together several equiments.
The interfaces are full duplex and support the protocols PRI or E1 CAS.
Ethernet capacity
1 LAN interface on the PGVoIP card
1 WAN interface on the PGVoIP card
Connector types: RJ45 – 10/100 BaseT
Mobile Card
Up to 4 Quad Band GSM / UMTS modules
1 RF(built in splitter) or 4 RF circular connectors for mobile antennas
4 SIM cards per GSM board
Aditionally, it may also feature four ISDN BRI digital interfaces
HSDPA engine
Networks frequencies:
850/1900/2100 MHz WCDMA Power class 3 (+24dBm)
850/900MHz GSM/GPRS/EDGE GSM Power class 4/ EDGE E2
1800/1900 MHz GSM/GPRS/EDGE GSM Power class 1 /EDGE E2
GSM engine
Networks frequencies:
900 / 1800 MHz & 850 / 1900 MHz
Configurable Universal
Card for FSX / FXO ports
MPAI motherboard card with up to 8 FSX / FXO ports in different
configurations
The SLIC for the ports are available as daughterboards
RJ45 connectors for all 8 interfaces
Direct software upgrade
FSX ports
Electrical characteristics of the line circuit:
- line current limited to 30 mA
- line resistance for which a 20mA loop current is assured: 1,7Kohm
- insulation resistance for which the closed loop situation is no longer
detected: 20 K ohm
- galvanic insulation between the phone line and the low voltage command
circuits
Codecs used
G.711 – up to 60 voice channels
G.723.1, G.729ab – up to 30 voice channels
Signaling protocols
SIP v.1, v.2
H.323 v.2, v.4
Mobile Antennas
Different individual antennas or collective antennas for the corresponding
frequency bands
Power Supply
230VAC / 50MHz
When FXO or FXS ports are required, the equipment must be fitted with an
additional power supply for the voltage -48V
DC
.
Operating temperature
5
o
C
50
o
C
÷
Humidity
10% - 85 % without condensing
