Topens Casar MT8012, Руководство пользователя

Страница: 17 / 32

14
CAUTION: Install the Control Box in a well ventilated place protected against rain
and sunlight.
CAUTION: Make sure the cable outlet hole in the Control Box is always down
during installation so as to drain off the water.
Step 3
Insert the cable of the second gate opener and alarm lamp cables into the control
box through middle strain relief. Then repeat step 2.
Step 4
Insert other cables into the control box through rightmost strain relief. Then repeat step 2.
NOTE: Only motor cables (1.5m length) are provided. Other cables are subject to site installation requirement
and not provided.
Connection of the Power Supply
WARNING: NEVER connect the gate opener to the power outlet before all the installations have
been done.
The live line and the neutral line should be connected to the power input terminals as the below photo. No
matter the polarity. The wire (not provided) size should be at least 0.75mm2 (18AWG) which is intended to
connect the power supply.