manualshive.com logo in svg

Topcon TP-L6 Series, Инструкция по эксплуатации

Поделиться
Скачать
Topcon TP-L6 Series Скачать руководство пользователя страница 5

2

1. PRECAUTIONS FOR SAFE OPERATION

Tripod

Do not use voltage other than the specified power supply voltage. Fire or electrical shock 
could result.

Do not use batteries other than those designated. An explosion could occur, or abnormal 
heat generated, leading to fire.

Do not use damaged power cords, plugs or loose outlets. Fire or electric shock could result.

Do not use power cords other than those designated. Fire could result.

Use only the specified battery charger to recharge batteries. Other chargers may be of 
different voltage rating or polarity, causing sparking which could lead to fire or burns.

Do not use the battery or charger for any other equipment or purpose. Fire or burns caused 
by ignition could result.

Do not heat or throw batteries or chargers into fire. An explosion could occur, resulting in 
injury.

To prevent shorting of the battery in storage, apply insulating tape or equivalent to the 
terminals. Otherwise shorting could occur, resulting in fire or burns.

Do not use the battery or battery charger if its terminals are wet. Resultant poor contact or 
shorting could lead to fire or burns.

Do not connect or disconnect power supply plugs with wet hands. Electric shock could 
result.

Caution

Do not touch liquid leaking from batteries. Harmful chemicals could cause burns or blisters.

Caution

When mounting the instrument to the tripod, tighten the centering screw securely. Failure to 
tighten the screw properly could result in the instrument falling off the tripod, causing injury.

Tighten securely the leg fixing screws of the tripod on which the instrument is mounted. 
Failure to tighten the screws could result in the tripod collapsing, causing injury.

Do not carry the tripod with the tripod shoes pointed at other persons. A person could be 
injured if struck by the tripod shoes.

Keep hands and feet away from the tripod shoes when fixing the tripod in the ground. A hand 
or foot stab wound could result.

Tighten the leg fixing screws securely before carrying the tripod. Failure to tighten the 
screws could lead to the tripod legs extending, causing injury.

Содержание TP-L6 Series






























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды