manualshive.com logo in svg

Topcon TP-L6 Series, Инструкция по эксплуатации

Поделиться
Скачать
Topcon TP-L6 Series Скачать руководство пользователя страница 12

9

3. LASER SAFETY INFORMATION

Caution

• Perform checks at start of work and periodic checks and adjustments with the laser beam emitted under 

normal conditions.

• When the instrument is not being used, turn off the power.
• When disposing of the instrument, destroy the battery connector so that the laser beam cannot be emitted.
• Avoid setting the instrument at heights at which the path of the laser may strike pedestrians or drivers at head 

height. Operate the instrument with due caution to avoid injuries that may be caused by the laser beam 
unintentionally striking a person in the eye.

• Do not emit the laserbeam at eye level.
• Never point the laser beam at mirrors, windows or surfaces that are highly reflective. The reflected laser beam 

could cause serious injury

• Only those who have received training as per the following items shall use this product.

• Read this manual for usage procedures for this product.
• Hazardous protection procedures (read "LASER SAFETY INFORMATION")
• Requisite protective gear (read "LASER SAFETY INFORMATION")
• Accident reporting procedures (stipulate procedures beforehand for transporting the injured and 

contacting physicians in case there are laser-induced injuries). 

• Persons working within the range of the laser beam are advised to wear eye protection which corresponds to 

the laser wavelength of the instrument being used. (OD2)

• Areas in which the laser is used should be posted with a standard laser warning sign.

Содержание TP-L6 Series






























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды