manualshive.com logo in svg

Topcon TP-L6 Series, Инструкция по эксплуатации

Поделиться
Скачать
Topcon TP-L6 Series Скачать руководство пользователя страница 18

15

4. PRODUCT OUTLINE

Warning indications

Battery warning indication

Operation is impossible. Replace with a fully charged battery. 

The laser beam is not emitted then, and the centerline LED does not turn on, too.
 The power is automatically turned OFF within ten minutes.

Level warning indication

The instrument tilted beyond the auto-leveling range to the back or front.
The laser beam will flash slowly. 
Reposition the instrument by tilting in the direction indicated by arrow.

Rotation warning indication

The instrument is tilted too far to the right or left.
The laser beam will flash slowly.
Reposition the instrument to the direction indicated by arrow.
Always position the instrument so the bubble in the digital level vial is centered.

Rotation direction detection error

Reposition the instrument horizontally.

During laser position adjusting process

The display will appear during the adjustment of the laser after the startup of the 
instrument.

  

Operations can be performed just after "WAIT" disappears.

• If the battery is removed while the instrument is turned ON, this display may be 

appeared the next time the instrument starts up.

• This display may be appeared when operating at especially high/low 

temperature or starting up the instrument after the battery warning indication 
"EMPTY" being displayed.

• While "WAIT" is displayed, the key operations are impossible.

Safety Lock 

If the instrument is moved for any reason after the laser is OFF (standby mode) 
using the remote controller, a safety lock will be in operation. This is to insure 
operational accuracy. "SAFETY LOCK" will appear on the display and the laser 
beam will flash. To reset, turn power OFF the instrument by the Power key on the 
control panel, check the instrument position, and then turn ON the instrument 
again. While the safety lock is in operation, power cannot be turned ON/OFF by 
the remote controller.

WAIT

Содержание TP-L6 Series






























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды