manualshive.com logo in svg

Topcon OS-101, Инструкция по эксплуатации

Поделиться
Скачать
Topcon OS-101 Скачать руководство пользователя страница 98

17. OFFSET MEASUREMENT

92

6. Sight the offset point and press 

[MEAS]

 in the 

screen of step 5 to start measurement. 
Press 

[STOP]

 to stop the measurement.

The measurement results are displayed.

• Press

 [HVD/nez] 

to switch results for the target 

point between distance/angle values and 
coordinate/elevation values.

Sighting the direction of the target point to find it from the included angle.
Install offset points for the target point on the right and left sides of and as close as possible to the 
target point and measure the distance to the offset points and the horizontal angle of the target point.

PROCEDURE

1. Set the offset points close to the target point 

(making sure the distance from the instrument 
station to the target point and the height of the 
offset points and the target point are the same), 
then use the offset points as the target.

2. Select "Offset" in <Menu> to display <Offset>.           

Select "OffsetANG.".

17.2

Angle Offset Measurement

Содержание OS-101






































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды