manualshive.com logo in svg

Topcon OS-101, Инструкция по эксплуатации

Поделиться
Скачать
Topcon OS-101 Скачать руководство пользователя страница 2

i

HOW TO READ THIS MANUAL

Thank you for selecting the OS-101/102/103/105/107.
• Please read this instruction manual carefully, before using this product.
• OS has a function to output data to a connected host computer. Command operations from a host 

computer can also be performed. For details, refer to "Communication manual" and ask your local 
dealer.

• The specifications and general appearance of the instrument may be altered at any time and may 

differ from those appearing in brochures and this manual.

• The content of this manual may be altered at any time.
• Some of the diagrams shown in this manual may be simplified for easier understanding. 

Symbols

The following conventions are used in this manual.

[Softkey]

 etc.

: Indicates softkeys on the display and window dialog buttons.

{Key}

 etc.

: Indicates keys on the operation panel.

<Screen title> etc.: Indicates screen titles.

:

Indicates precautions and important items which should be read before 
operations.

:

Indicates the chapter title to refer to for additional information.

:

Indicates supplementary explanation.

:

Indicates an explanation for a particular term or operation.

Содержание OS-101






































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды